ANSI Carbon Steel WPL3 48 Inch Pipe Fittings Reducer

Carbon Steel Concentric Pipe Fitting Reducer 1/2"-48" Pipe Fittings Reducer

As the name implies, the carbon steel size head uses carbon steel, mainly represented by 20#, Q235, Q345, 16Mn, etc. Used for connection between two different pipe diameters. According to different shapes, there are two types: concentric and eccentric. Concentricity is well understood that the center points of the circles at both ends of the tube are on the same straight line, which is called concentric size head, otherwise it is eccentric size head.

Main application industries of carbon steel head

1. The carbon steel size head can be applied to the control of water, gas, gas, oil and corrosive media in the chemical, petroleum, metallurgical, light industry, electric power, plumbing, food, pharmaceutical, fiber, ink and other industries.

2. Sanitary valves, fluid pipe fittings, special pipe fittings for special industries and mechanical supporting equipment can be used in dairy, pharmaceutical, beer, beverage, edible oil and other industries to meet their professional requirements.

3. Products produced in accordance with different standard systems can be adapted to the corresponding standard system of supporting equipment, and non-standard products can be produced according to user requirements for special purposes.

Characteristics of stress distribution

(1) The bending moment generated by the area pressure difference between the large and small ends of the concentric reducer under the action of internal pressure causes the large end to relatively open and the small end to contract;

(2) The hoop stress on the inner surface of the large end of the eccentric side and the outer surface of the middle of the eccentric reducer under the action of internal pressure is the largest.